Celanese Engineered Materials has developed a new chemical bonding technology for joining its Zytel polyamides and aluminum—a common design challenge in numerous automotive and industrial applications. Zytel Bonding Technology works via application of a liquid solution to an aluminum surface that is then activated via hot plate welding or overmolding. The resulting structural bond leads to higher burst, tensile and shear strength than conventional adhesives, mechanical interlocking and mechanical assembly methods. In burst pressure testing, the joint held while the plastic showed a cohesive failure.
With the ability to be added at room temperature, the coating can be sprayed, brushed, dipped or applied to a substrate in an injection mold, and it features a shelf life of up to 3 years. Compatible with multiple polyamide chemistries, this new bonding technology can join PA6, PA610, PA612, PA66, and PPA with aluminum. Celanese notes that all of these materials are available within the Zytel and Zytel HTN portfolios.
The disparate materials are joined in a three-step process, starting with the removal of aluminum oxide from the aluminum part surface via water sanding, wet blasting, or plasma/laser treatments. Next, Zytel Bonding Technology is applied via spray, brush, dip or other methods at room temperature. The coating is activated in the third step by overmolding plastic onto an aluminum insert or by hot plate welding a previously molded Zytel part to the aluminum component. The chosen method depends on the geometry of the final hybrid aluminum-plastic component.
At K 2022, Giacomo Parisi, marketing director automotive electrification at Celanese (formerly Dupont), discussed development of the technology and an early potential application—a hybrid cooling plate for an electric vehicle battery module.
“Hybrid” in this case because the two-part component features a plastic bottom and aluminum top. In an electric vehicle, these plates sit below the battery modules with water glycol cycling through them to ensure the batteries stay within the optimal operating range between 20 and 40°C.
At present, most cooling plates are monomaterial metal-on-metal constructions that experience the dissipation of heat through the bottom of the part. By utilizing a Zytel polyamide, the hybrid plate features better insulative properties. The company undertook testing to ensure the plastic/metal component could withstand the pressures and water-glycol exposure to be experienced in the field by the part. In the end, a 30% glass-filled Zytel HTN family of polyamides based on PPA was chosen. In addition to its robust mechanical properties and strong chemical resistance, this material was picked on the basis of its high dimensional stability—requisite in what has to be a flat part.
From a stress perspective, the water-glycol within the cooling plate reaches pressures of approximately 10 bar (145 psi). In terms of application temperatures, on the high side, the cooling plates work to keep the battery modules from overheating and cascading into a thermal runaway situation. In colder environments, the plates work to keep the battery modules from dropping below freezing.
In addition to the cooling plate, Celanese sees potential application of the technology in EV battery plugs; structural components, like beams, brackets, pillars, and mounts; noise and vibration reduction components; filters; modules; housings; clips; quick connectors; and flow leads, among others.
Photo Credit: Celanese Engineered Materials
No comments:
Post a Comment